Clinical Chemistry .....  Electrophoresis .....  Immunochemistry .....  Instruments .....  Reagents .....  Disposable                                                                              Video resolution suggested: 800X600 pixel
                             service       ACTO1  page            
   
     [ HOME ] [ CLINICAL CHEMISTRY ] [ IMMUNOCHEMISTRY ] [ ELECTROPHORESIS ]             

HOME
Technical Data  

 [ Products ] [ Support ] [ Partners ] [SPARE PARTS ] [ACCESSORIES ]  [DIAGNOSTICS ]

	ALL IN ONE! Computerized Semi-automatic  Analyser!
Click above to expand the picture

The Analyzer...
		Using the built-in computer (Dos compatible) can do analyses you have never been able to do before by an analyzer of the same class. Coagulation: the instrument gives the coagulation time in seconds and the I.N.R. through a special algorithmic that studies the Aggregation curve fixing a better coagulation point even in pathological cases (using only plastic 500 ml square cell and 450 nm. Filter). Elisa: Acto1 hydraulic system has an aspiration of a minimum volume of 300 ml. Therefore it is possible to have aspirate directly from the micro-well. Automatic facilities for the evaluation of the Grey-zone, dubious, positive or negative results (qualitative tests), and the logarithmic calibration curve (up to 10 points) for quantitative results. Biochemistry: Up to 10 calculation pre-set: End-point ~ Short Kinetic ~ Long Kinetic ~ Fixed-time ~ Bi-chromatic ~ Sample blank ~ Kinetic research ~ Non linear coagulation ~ Logarithmic etc. Each pre-set can be directly modified into the test parameters to give the best performance test by test. The Acto 1 is the only semi-automatic analyzer with the exclusive washing system between samples that considerably reduces the carry over.

  Back to top

The Software...
		gives a wide range of opportunities such as the Data Lab management system with the Demographic data Archive and the Patient results Archive plus the Patient Report and the Work-list Menu. Besides, you will find with the normal operations of the instruments, such as QC with curves - C.V. and S.D. Calculation - 240 tests in memory which are (divided in panels of 24 tests each) others exclusive options of the Acto1: - the Stop-watch that advises the operator when the external incubation time is finished (up to 24 stop watch contemporaneously contemporaneously for the End-Point tests). - the Multi-layout which shows and prints up to 10 Curves together. - the Auto-centering system, a sophisticate way to reach the best performances, which works always with the better zone of the filters.

  Back to top

The Hardware...
		has been studied to get the maximum quality of results with great reliability. Acto1 has a 16 bit A/D converter built-in that means internal resolution up to the 4th decimal point and great repeatability with kinetic test. The quartz lamp is a long-life model (1000 hours) with a life safety circuit which has an automatic switch-off during stand-by modes. The photodiode is a UV-enhanced SI semi-conductor to obtain the maximum signal at 340 nm wavelength and the optical circuit has been designed with 3 quartz lens to focalize the majority of the beam of light. The Hydraulic circuit uses a peristaltic pump to aspirate the sample and a membrane pump to clean the internal flow-cell with the special cleaning solution (Actoclean).

  Back to top

  Back to top

  Back to top

ACTA SERVICE S.R.L
VIA CASTEL DI LEVA, 396 - 00134 ROME - ITALY - Tel.:+39-0671356151   Fax: +39-0671350020      
E-mail:  Export@actaservice.com E-mail:  Service@actaservice.com